Jamshedpur

India's first Organized High End Steel Processing facility catering to Automobile segment

World Class Slitting, Cut To Length Lines and Roll Forming Lines

In 1997, the company started its operation with two of its plants in Jamshedpur. Today, TSPDL has three facilities in the City, in and around Tata Steel Works. These plants have the most advanced lines in India.

Catering primarily to the Automotive Segment Customers, Tube making and Construction Segment customers, these plants offer High End processing as per the stringent requirements of these sectors.

Hot Rolled processing facility at Bara

The Hot Rolled processing facility is located at Bara and is capable to process steel coils up to 12 mm thickness. The major USP of the plant is that it can process coils of UTS up to 800 Mpa.

Cold Rolled processing facility inside Tata Steel Works

The Cold Rolled processing facility is located inside the Tata Steel Works and is capable of processing coils up to 3.2 mm thickness. The lines are capable of processing High Tensile material of UTS up to 700 Mpa.

The plant is also equipped with Roll Forming lines and Barrel Corrugators, which are used for corrugation of roofing sheets used in the construction industry. The USP of this plant is its Skin panel processing capacity, which serves major automotive customers.

Third plant located within the Tata Steel Tube Division

The third plant is located within the Tata Steel Tube Division and mainly caters to the requirements of the Tube making industry. It can slit coils up to 9.5 mm thickness and 1700 mm width.

All the three plants in Jamshedpur Unit are IATF certified and GreenCo Gold rated companies.

The Hot Rolled and Cold Rolled facilities serve some of the leading OEMs in the Automobile space such as Tata Motors Limited, Toyota Motor Corporation, TVS Motor Company, Hero Motor Corp, Honda Motor Cycles and Scooters India among many others.

Apart from the above mentioned customers, these plants also fulfil the requirements of Indian Railways, Packaging Segment customers such as E Con Packaging (P) Ltd. and Balmer Lawrie and serve the requirements of Tata Steel Tubes Division and Tinplate Company of India Limited.

Technical Specifications:

    Hot Rolled Slitting Lines
  • Thickness: 1.0 to 8.0 mm
  • Max. UTS: 800 Mpa
  • Capable of Processing Material: HR / HRPO
    Cut To Length Lines
  • Thickness: 2.0 to 12 mm
  • Max. UTS: 540 Mpa
  • Capable of Processing Material: HR / HRPO
    Cold Rolled Slitting Lines
  • Thickness: 0.3 to 3.2 mm
  • Max. UTS: 540 Mpa
  • Capable of Processing Material: CR/ GA/ GP
    Cut To Length Lines
  • Thickness: 0.4 to 3.2 mm
  • Max. UTS: 540 Mpa
  • Capable of Processing Material: CR/ GA/ GP
    Roll Forming Lines
  • Thickness: 0.4 to 1.0 mm
  • Max UTS: 540 Mpa
  • Capable of Processing Material: GP
    Barrel Corrugation
  • Thickness: 0.4 to 1.0 mm
  • Max UTS: 540 Mpa
  • Capable of Processing Material: GP
    Inspection & Parting Line
  • Thickness: 1.0 to 6.0 mm
  • Max UTS: 540 Mpa
  • Capable of Processing Material: CR/ HRPO